Small game beware, the Y-Shot plus the Breakdown Arrow Set is a potent combination. Three aluminum shaft arrows with Talon 125 Grain broadheads made specifically for small game plus an arrow rest, field points, and a double band are a potent combination. This product is made in the US.
- silent way to kill small game without the report of a rifle or shotgun.
- the aluminum arrows breakdown into three pieces connected by shock cord for easy transport.
- the 125 grain broadhead is specifically designed for use with small grain and packs a devastating impact.
- a double band for added arrow velocity
- 3 extra fletchings allow you to repair your arrow fletchings if they are ever damaged. These fletchings are easy to apply. All you need is boiling water and 2 minutes of your time.
- the Montie Gear Arrow Rest is specifically designed for use with the Montie Gear Y-Shot Slingshot.
- field points for the arrow are also included.
The set includes:
(3) aluminum shaft arrows with Talon 125 Grain broadheads and a polymer ball for easy grip.
(3) field points for target practice.
(1) arrow rest for the Y-Shot slingshot
(1) double band for power and so you always have a spare
(3) extra fletchings that are easily replaced without tools, all you need is boiling water to repair a damage fletching.
Please note: This arrow is intended for use with the Y-Shot Slingshot. It is not appropriate for use with a bow or a crossbow. We warranty the arrows and arrow rest to be free from defects for the lifetime of the product. Fletchings and slingshot bands are wear items and not covered by our warranty. However, keep spare bands at the ready for when you need one. Please keep in mind that any time you put something in the path of the slingshot band as it snaps forward it shortens the life of the band so keep extra bands and a screwdriver on hand when using the arrows and arrow rest.
Liability Disclaimer
Upon purchase, receipt, and/or use, you (the user) agree to hold harmless Montie Inc., Montie Gear (www.montiegear.com), and Montie Design (www.montie.com), and its owner and offices, heirs, or employees of any and all product liability. You agree that the above-mentioned will not be held responsible or liable for any consequential, direct or indirect or special loss, injury, or accidents caused by the slingshots, bands, pouch, ammo or other items that we produce, promote, and/or sell. In all cases, the user assumes full responsibility and all risk associated with the use of our products. It is your (the user's) responsibility to check local laws in order to be compliant with the slingshot, or other products that we produce, promote, and/or sell. Our products are not to be purchased by anyone under 18 years of age. We strongly advise parents to supervise their children at all times whenever they are using slingshots.
Care and Maintenance
• Always examine the band and pouch before use for small nicks, tears, or punctures that may cause the band to break. If you find any flaws, immediately discard the product and replace before use.
• Store all bands out of direct sunlight and away from extreme temperatures. This is important to maximize the life of the band, especially in storage.
• Never use rocks or other sharp objects as ammunition. Rocks and sharp objects will damage the band and pouch.
• After contact with chlorinated water, rinse the bands with tap water and dry flat.
• If the bands becomes sticky, clean with mild soap and water, dry flat, and then dust with talcum powder.
Note: Please keep in mind that the slingshot bands are made from a natural material. This means that we have no way of predicting the life of the band. Even the best maintained bands can fail inexplicably or have a short life time. Despite our best efforts, using high quality industry standard materials and testing; approximately 1% of the bands fail early. As a result we strongly encourage you to purchase extra bands. We do not provide a warranty of any kind on bands.
About the Designer
Nicholas Alexander Pennington, currently pursuing an undergraduate degree in Industrial Design, has a bold, determined attitude and perspective on the design process. This unique perspective and his passion for unique products led him to become a finalist in the 2011 Montie Design Contest, and an intern for Montie Design during the summer of 2011. Pennington specializes in 3D modeling, sculptures, and dynamic products such as knives, military and defense products, and tools. He plans to graduate in May 2013, and work at an outdoor gear company or knife company focusing on knives and pocket knives.
