13.56 MHz RFID Field Detector - ISO 14443
Never again wonder where an RFID portal can, or can't, read tags. The 13.56 mHz Montie Gear RFID Field Detector allows the user to quickly determine the location of the extents of an RFID field just by pushing a button watching as the signal strength changes with the location of the card. It it is a great way to see if your NFC or payment system is radiating a signal.
You can calibrate the device to your specific system!
Note: Images show the prototype. The production version will include a Montie Gear logo and graphics similar to our other RFID products.
Law Enforcement Uses: Detect fields radiated by criminals (skimmers) as they are steal card numbers and card id information.
Montie Gear RFID Field Detectors are used worldwide as simple tools to test whether or not RFID portals are emitting a signal. These inexpensive tools help technicians troubleshoot RFID systems since 2009. The RFID Field Detector is our next generation unit, providing the ability to inexpensively find the extent of the usable RFID field. These are great field strength probes.
Advanced RFID Field Detectors Profiled to Your OEM Product: The basic RFID Field Detectors are an excellent way to determine where your field reaches and where it does not. Advanced RFID Field Detectors are a calibrated way of enhancing the accuracy of the results. Send your portal, antenna and sample tags to Montie Gear. We will then create a custom RFID Field Detector that is calibrated to your specific portal / antenna / tag combination. We can even brand it with your logo. Integrate these cards into every RFID system you sell as a great way to provide a value add to your customers, or just sell them as a way to increase customer satisfaction, provide a valuable tool, and bring in additional profits. Contact Montie Roland today at montie@montie.com or 800-722-7987 to get us started on your custom branded RFID Field Detector.
For more detailed information about the Montie Gear 900MHz RFID Field Detector, check out the Description tab below!
Specifications
- Use with these systems
MIFARE
Biometric passports
EMV payment cards (PayPass, payWave, ExpressPay)
German identity card
Near Field Communication (NFC)
Calypso
CIPURSE
ISO/IEC 14443 - Detects 13.56 MHz signal
- Shows size of field
- Great way to search for skimmers (useful for law enforcement - email montie@montie.com for more information)
- Bright green LEDs
- Requires three (3) AAA batteries
- Made in USA - Troublesome Gap tough
Weight & Dimensions
- 1 ounce
- 2 ounces with AAA batteries installed
- 3.625" x 3.375" x .625" (L x W x D)
Specifications
- Detects 13.56MHz signal (EMV chip card reader, contactless reader, ISO/IEC 7816-3, ISO 14443)
- Yes/No signal detection
- Bright green flashing LED
- No batteries
- Made in USA - Troublesome Gap tough
Weight & Dimensions
- 0.3 ounces
- 3.375" x 2.1215" (L x W)
- Slightly thicker than credit card
- ISO 7810-ID1
Description
Never again wonder whether your HF / contact-less reader (13.56MHz) is radiating a signal!
This inexpensive card allows you to quickly troubleshoot your contact-less reader without have to send the reader back to the manufacturer. We keep these cards in stock so they ship quickly.
Montie Gear RFID Troubleshooting Tools are used worldwide as simple tools to test whether RFID portals are emitting a signal. These inexpensive tools have helped technicians troubleshoot RFID systems since 2009.
How It Works: Its really simple. Hold the card in close proximity to the reader antenna and if the unit is radiating power, then the led comes on. This gives a never before seen (at least with a low cost device) ability to understand the size and strength of the field for the portal / contact-less reader. Because the card looks for a strong 13.56MHz signal instead of an RFID header, there is no setup. Just pull out the card and hold it up to the reader.
NOTE: This card does not detect RFID / Contact-less tags.
Sustainable Design: This device is very simple, uses minimal materials and no batteries.
Custom: We can even brand these cards with your logo. Integrate these cards into every 13.56 MHz system you sell as a great way to provide an added value to your customers, or just sell them as a way to increase customer satisfaction, provide a valuable tool, and bring in additional profits. Contact Montie Roland today at montie@montie.com to get us started on your custom branded RFID Field Detector.
Important Features
- Detects whether your portal is producing a 13.56MHz signal
- Bright green LED flashes when powered by a portal
- Easily stores in your wallet; Credit card sized
- No batteries necessary - uses power from the portal
Literature
Calibration Info
Download the Manual
In The News: The 13.56MHz RFID Field Detector
