- Looking through old inventory and found these.  We've had requests so they are on the website ready to purchase -

Spend more time shooting and less time hauling equipment around.  The X-Rest is a lightweight and portable shooting rest for a variety of firearms from hunting rifles to shotguns to pistols and more!  The X-Rest means freedom from the heavy bench rest or bipod.  

The X-Rest was designed to give you a very portable and lightweight rest for sighting in your rifle.  When you are finished shooting, it quickly breaks down to slip in your bag without taking much space.  The X-Rest also keeps the forestock of your rifle or shotgun approximately 6.5 inches from the top of the bench (or ground).  The parts are cut from a sheet of aluminum with a water jet to maintain their temper and strength.  Then we apply an industrial grade powder coat finish for long life.  This is heirloom quality equipment.

The idea for the X-Rest came from an afternoon when our company president, Montie Roland, was teaching his daughters to shoot.  He was carrying his equipment from the car to the firing line and thinking "there has to be a better solution that this 10 lb bench rest".  A few weeks later we had the first prototypes for the X-Rest.

For more detailed information about the Montie Gear X-Rest, check out the Description tab below!

If you have a 900 MHz RFID portal or system, you need this inexpensive troubleshooting tool as a quick way determine if your system is radiating a signal from the antenna. To test, simply hold card up to the antenna and check for the LED light. Worth the cost in time savings alone.

Use the 900MHz RFID Troubleshooting Tool to test your Gen II RFID portal / system and determine if it is radiating a signal from the antenna. Technicians and users around the world (including the US government who created the acronym RATS for the card) use these cards to troubleshoot and verify their RFID systems.  These tools are also great for setting up your race timing system.

Branding: These cards can even be branded with your logo! Integrate these cards into every 900MHz system you sell as a great way to provide an added value to your customers, or an added revenue stream for you!

For more detailed information about the Montie Gear 900MHz RFID Troubleshooting Tool, check out the Description tab below!

NOTE: This card works with all 900MHz RFID systems (850 to 950 MHZ) around the world with a power above 500 milliwatts.

Does not detect the presence of RFID tags.

Be prepared in the event of an EMP (Electromagnetic Pulse) or CME (Coronal Mass Ejection) by storing your most valuable belongings in an EMP resistant box.

This box is made from 3/16" aluminum plate welded together. The connection between the lid and the box uses three types of industry standard gaskets to form a robust Faraday cage. You can quickly enter and then reseal the box with six stainless steel clamps.

Initial testing on 13 Jun 14, indicates that you can expect a minimum of 50 dBm of shielding effectiveness from 100 kHz to 1 gHz, with a shielding effectiveness greater than 76 dB at 300 mHz and 66 dBm at 1 gHz.

For more detailed information about the Montie Gear Y-Shot slingshot, check out the Description tab below!

Options:

• Custom sizes available upon request (contact montie@montie.com)
• MuMetal iron lining for protection from the magnetic effects of the EMP.

Download brochure

Expect 8 weeks for delivery.

Never again wonder where an RFID portal can, or can't, read tags. The 13.56 mHz Montie Gear RFID Field Detector allows the user to quickly determine the location of the extents of an RFID field just by pushing a button watching as the signal strength changes with the location of the card.  It it is a great way to see if your NFC or payment system is radiating a signal.  

You can calibrate the device to your specific system!

Note:  Images show the prototype.  The production version will include a Montie Gear logo and graphics similar to our other RFID products.

Law Enforcement Uses:  Detect fields radiated by criminals (skimmers) as they are steal card numbers and card id information.

Montie Gear RFID Field Detectors are used worldwide as simple tools to test whether or not RFID portals are emitting a signal. These inexpensive tools help technicians troubleshoot RFID systems since 2009. The RFID Field Detector is our next generation unit, providing the ability to inexpensively find the extent of the usable RFID field.  These are great field strength probes.

Advanced RFID Field Detectors Profiled to Your OEM Product: The basic RFID Field Detectors are an excellent way to determine where your field reaches and where it does not. Advanced RFID Field Detectors are a calibrated way of enhancing the accuracy of the results. Send your portal, antenna and sample tags to Montie Gear. We will then create a custom RFID Field Detector that is calibrated to your specific portal / antenna / tag combination. We can even brand it with your logo. Integrate these cards into every RFID system you sell as a great way to provide a value add to your customers, or just sell them as a way to increase customer satisfaction, provide a valuable tool, and bring in additional profits. Contact Montie Roland today at montie@montie.com or 800-722-7987 to get us started on your custom branded RFID Field Detector.

For more detailed information about the Montie Gear 900MHz RFID Field Detector, check out the Description tab below!