Fewer search options More search options
45 products found
Products: 127 of 45
Show: 27
Drop items here to shop
Product has been added to your cart
  • 900MHz RFID Troubleshooting Tool

    900MHz RFID Troubleshooting Tool

    If you have a 900 MHz RFID portal or system, you need this inexpensive troubleshooting tool as a quick way determine if your system is radiating a signal from the antenna. To test, simply hold card up to the antenna and check for the LED light. Worth the cost in time savings alone.

    Use the 900MHz RFID Troubleshooting Tool to test your Gen II RFID portal / system and determine if it is radiating a signal from the antenna. Technicians and users around the world (including the US government who created the acronym RATS for the card) use these cards to troubleshoot and verify their RFID systems.  These tools are also great for setting up your race timing system.

    Branding: These cards can even be branded with your logo! Integrate these cards into every 900MHz system you sell as a great way to provide an added value to your customers, or an added revenue stream for you!

    For more detailed information about the Montie Gear 900MHz RFID Troubleshooting Tool, check out the Description tab below!

    NOTE: This card works with all 900MHz RFID systems (850 to 950 MHZ) around the world with a power above 500 milliwatts.

    Does not detect the presence of RFID tags.

    Made in USA

    Not rated yet
    • $24.95
  • X-Rest

    X-Rest

    Spend more time shooting and less time hauling equipment around.  The X-Rest is a lightweight and portable shooting rest for a variety of firearms from hunting rifles to shotguns to pistols and more!  The X-Rest means freedom from the heavy bench rest or bipod.  

    The X-Rest was designed to give you a very portable and lightweight rest for sighting in your rifle.  When you are finished shooting, it quickly breaks down to slip in your bag without taking much space.  The X-Rest also keeps the forestock of your rifle or shotgun approximately 6.5 inches from the top of the bench (or ground).  The parts are cut from a sheet of aluminum with a water jet to maintain their temper and strength.  Then we apply an industrial grade powder coat finish for long life.  This is heirloom quality equipment.

    The idea for the X-Rest came from an afternoon when our company president, Montie Roland, was teaching his daughters to shoot.  He was carrying his equipment from the car to the firing line and thinking "there has to be a better solution that this 10 lb bench rest".  A few weeks later we had the first prototypes for the X-Rest.

    For more detailed information about the Montie Gear X-Rest, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 3)
    Reviews: 3
    3
    • $49.95
  • AR-Rest

    AR-Rest

    Spend more time shooting and less time hauling equipment around.  The AR-Rest means freedom from the heavy bench rest or bipod.  

    The AR-Rest was designed to give you a very portable and lightweight rest for sighting in your rifle.  When you are finished shooting, it quickly breaks down to slip in your bag without taking much space.  The AR-Rest also keeps the hand grip of your AR-15 or AK-47 approximately 9.5 inches from the top of the bench (or ground) to clear 25-30 round high capacity magazines.  The parts are cut from a sheet of aluminum with a water jet to maintain their temper and strength.  Then we apply an industrial grade powder coat finish for long life.  This is heirloom quality equipment.

    The idea for the AR-Rest came from an afternoon when our company president, Montie Roland, was teaching his daughters to shoot.  He was carrying his equipment from the car to the firing line and thinking "there has to be a better solution that this 10 lb bench rest".  A few weeks later we had the first prototypes for the X-Rest, and then later the AR-Rest.

    For more detailed information about the Montie Gear AR-Rest, check out the Description tab below!

    Made in USA

    Score: 4.33 (votes: 3)
    Reviews: 3
    3
    • $59.95
  • Precision Rest

    Precision Rest

    Precision matters on the range and in the field. Ensure more complete accuracy with this Precision rest.

    Being ultralight, this rest is especially handy in the field or on the trail where weight is critical. The Precision Rest provides fine and coarse adjustment for those times when shot placement is critical. Get the shot with a perfectly level rest!

    For more detailed information about the Montie Gear Precision Rest, check out the Description tab below!

    Made in USA

    Not rated yet
    • $249.95
  • Coffee Table

    Coffee Table

    A showpiece for your foyer, office, or man cave. The powder coated, aluminum construction gave us the freedom to create an heirloom that is unique with both a tactical feel and the presence of a high end architectural piece. Looks as good with your favorite assault rifle on it as it does with a vase of flowers. This is one very cool coffee table.

    We have a black table in stock. The bare aluminum version is a custom order, please allow 4-6 weeks for delivery. We also provide custom options such as company logos etched in the glass or the table powder coated with your company colors. Call 1-800-722-7987 for more information.

    For more detailed information about the Montie Gear Coffee Table, check out the Description tab below!

    Made in USA

    Not rated yet
    • $2495.00
  • Single Band, Flat Replacement Band

    Single Band, Flat Replacement Band

    Never be without a backup band for your Y-Shot!

    With a 16 pound pull weight, these bands will surely outperform your expectations in the field. The common band on our Y-Shot, this type band will give you plenty of use with your Y-Shot, and is what we use for our slingshot daily use!

    For more detailed information about the Single Band Flat Replacement Band, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 3)
    Reviews: 3
    3
    • $7.00
  • 900MHz RFID Field Detector

    900MHz RFID Field Detector

    Never again wonder where an RFID portal can, or can't, read tags. The Montie Gear RFID Field Detector allows the user to quickly determine the location of the extents of an RFID field just by pushing a button watching as the signal strength changes with the location of the card.

    Montie Gear RFID Field Detectors are used worldwide as simple tools to test whether or not RFID portals are emitting a signal. These inexpensive tools help technicians troubleshoot RFID systems since 2009. The RFID Field Detector is our next generation unit, providing the ability to inexpensively find the extent of the usable RFID field.  These tools are also great for setting up your race timing system.

    Advanced RFID Field Detectors Profiled to Your OEM Product: The basic RFID Field Detectors are an excellent way to determine where your field reaches and where it does not. Advanced RFID Field Detectors are a calibrated way of enhancing the accuracy of the results. Send your portal, antenna and sample tags to Montie Gear. We will then create a custom RFID Field Detector that is calibrated to your specific portal / antenna / tag combination. We can even brand it with your logo. Integrate these cards into every RFID system you sell as a great way to provide a value add to your customers, or just sell them as a way to increase customer satisfaction, provide a valuable tool, and bring in additional profits. Contact Montie Roland today at montie@montie.com to get us started on your custom branded RFID Field Detector.

    For more detailed information about the Montie Gear 900MHz RFID Field Detector, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 3)
    Reviews: 3
    3
    • $59.95
  • 900MHz RFID Field Detector - 3 Pack
    • 10% off

    900MHz RFID Field Detector - 3 Pack

    Order this convenient 3 pack at a 10% discount off the normal price.

    Never again wonder where an RFID portal can, or can't, read tags. The Montie Gear RFID Field Detector allows the user to quickly determine the location of the extents of an RFID field just by pushing a button watching as the signal strength changes with the location of the card.

    Montie Gear RFID Field Detectors are used worldwide as simple tools to test whether or not RFID portals are emitting a signal. These inexpensive tools help technicians troubleshoot RFID systems since 2009. The RFID Field Detector is our next generation unit, providing the ability to inexpensively find the extent of the usable RFID field.  These tools are also great for setting up your race timing system.

    Advanced RFID Field Detectors Profiled to Your OEM Product: The basic RFID Field Detectors are an excellent way to determine where your field reaches and where it does not. Advanced RFID Field Detectors are a calibrated way of enhancing the accuracy of the results. Send your portal, antenna and sample tags to Montie Gear. We will then create a custom RFID Field Detector that is calibrated to your specific portal / antenna / tag combination. We can even brand it with your logo. Integrate these cards into every RFID system you sell as a great way to provide a value add to your customers, or just sell them as a way to increase customer satisfaction, provide a valuable tool, and bring in additional profits. Contact Montie Roland today at montie@montie.com to get us started on your custom branded RFID Field Detector.

    For more detailed information about the Montie Gear 900MHz RFID Field Detector, check out the Description tab below!

    Made in USA

    Not rated yet
    • $161.87
  • 900MHz RFID Field Detector - 10 Pack
    • 25% off

    900MHz RFID Field Detector - 10 Pack

    Order this convenient 10 pack at a 25% discount off the normal price.

    Never again wonder where an RFID portal can, or can't, read tags. The Montie Gear RFID Field Detector allows the user to quickly determine the location of the extents of an RFID field just by pushing a button watching as the signal strength changes with the location of the card.

    Montie Gear RFID Field Detectors are used worldwide as simple tools to test whether or not RFID portals are emitting a signal. These inexpensive tools help technicians troubleshoot RFID systems since 2009. The RFID Field Detector is our next generation unit, providing the ability to inexpensively find the extent of the usable RFID field.  These tools are also great for setting up your race timing system.

    Advanced RFID Field Detectors Profiled to Your OEM Product: The basic RFID Field Detectors are an excellent way to determine where your field reaches and where it does not. Advanced RFID Field Detectors are a calibrated way of enhancing the accuracy of the results. Send your portal, antenna and sample tags to Montie Gear. We will then create a custom RFID Field Detector that is calibrated to your specific portal / antenna / tag combination. We can even brand it with your logo. Integrate these cards into every RFID system you sell as a great way to provide a value add to your customers, or just sell them as a way to increase customer satisfaction, provide a valuable tool, and bring in additional profits. Contact Montie Roland today at montie@montie.com to get us started on your custom branded RFID Field Detector.

    For more detailed information about the Montie Gear 900MHz RFID Field Detector, check out the Description tab below!

    Made in USA

    Not rated yet
    • $449.63
  • Double Band, Flat Replacement Band

    Double Band, Flat Replacement Band

    Upgrade from your Y-Shot's standard flat band to the ultra powerful Double Band for an impressive 35 pounds of pull weight! That's a 19 pound increase from our single band!

    Propel ammo further and with more force with this replacement Double Band. Never be without a back up for your trusty Montie Gear Y-Shot slingshot!

    For more detailed information about the Double Band Flat Replacement Band, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 5)
    Reviews: 5
    5
    • $12.00
  • End Table

    End Table

    The Montie Gear end tables are water jet cut from a single sheet of aluminum for strength, hand finished, and hand assembled for that museum quality look. This table is 24" long, 24" wide, and 22" tall. Because the materials used in the table are glass, aluminum, and stainless steel, this table does well indoors or outdoors.

    Finish off your room or man cave in a very sophisticated way with our line of tables. The entire line of tables coordinate so you can mix or match as needed.

    Available options include custom colors, bare aluminum finish, and custom sizes. Email montie@montie.com for more information.

    For more detailed information about the Montie Gear End Table, check out the Description tab below!

    Made in USA

    Not rated yet
    • $1995.00
  • Sofa / Buffet Table

    Sofa / Buffet Table

    The Montie Gear tables are water jet cut from a single sheet of aluminum for strength, hand finished, and hand assembled for that museum quality look. This table is 54" long, 18" wide, and 28.5" tall. Because the materials used in the table are glass, aluminum, and stainless steel, this table does well indoors or outdoors.

    Finish off your room or man cave in a very sophisticated way with our line of tables. The entire line of tables coordinate so you can mix or match as needed.

    Available options include custom colors, bare aluminum finish, and custom sizes. Email montie@montie.com for more information.

    For more detailed information about the Montie Gear Sofa / Buffet Table, check out the Description tab below!

    Made in USA

    Not rated yet
    • $2995.00
  • End Table, Tall

    End Table, Tall

    The Montie Gear end tables are water jet cut from a single sheet of aluminum for strength, hand finished, and hand assembled for that museum quality look. This table is 30" long, 18" wide, and 23-5/8" tall. Because the materials used in the table are glass, aluminum, and stainless steel, this table does well indoors or outdoors.

    Finish off your room or man cave in a very sophisticated way with our line of tables. The entire line of tables coordinate so you can mix or match as needed.

    Available options include custom colors, bare aluminum finish, and custom sizes. Email montie@montie.com for more information.

    For more detailed information about the Montie Gear End Table Tall, check out the Description tab below!

    Made in USA

    Not rated yet
    • $2495.00
  • Locking Rifle Rack, Adjustable

    Locking Rifle Rack, Adjustable

    Want to show off your rifle, but want to keep it out of the wrong hands? This is the way to do it.

    This rack won't stop a determined thief with tools, but it will give you piece of mind knowing that a thief or minor isn't going to just pick up and walk away with your gun when your back is turned.

    The rack uses two standard padlocks, to secure your rifle. There are ample locations for using lag bolts to secure the rack to a wall stud. The rack is adjustable in length to accommodate AR-15s and M-16s with different barrel lengths, hand grip / quad rail lengths and most accessories. AK-47s and Saiga rifles are also supported by this rack.

    Get yours today and show off that assault rifle while keeping it safe and out of the hands of minors and bad guys.

    For more detailed information about the Montie Gear Locking Rifle Rack, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 1)
    Reviews: 1
    1
    • $249.95
  • AR Wall Mount

    AR Wall Mount

    Show off your AR-15 with our US made, solid aluminum mount. The mount has a solid aluminum tongue that slides into the magazine well of the AR-15 and locks in place with the magazine lock giving the effect of your AR-15 floating on the wall.

    The magazine lock holds your AR-15 in place. To remove your rifle, just reach behind the rifle and release the magazine while picking up the rifle.

    This is a cool and unique way to show off your rifle. Order today!

    For more detailed information about the Montie Gear Wall Mount, check out the Description tab below!

    Made in USA

    Not rated yet
    • $129.95
  • Arrow Rest for Y-Shot
    • 29% off

    Arrow Rest for Y-Shot

    Make your Y-Shot arrow-ready in under a minute with the Arrow Rest.

    This Arrow Rest quickly and easily converts any Montie Gear Y-Shot into one that can shoot any size arrows! Perfect for hunting small game or target practice, the Arrow Rest adds almost no weight to the slingshot, yet supplies a superb alternative to carrying around a bow with you at all times.

    For more detailed information about the Montie Gear Arrow Rest, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 2)
    Reviews: 2
    2
    • $9.95
  • Garbage Bag Holder

    Garbage Bag Holder

    Plenty of trees but no branches or rope to hang a garbage bag from? Quickly set up a garbage bag within reach with the Montie Gear Garbage Bag Holder!

    Too many times, the perfect campsite is just missing one thing: A place for garbage. With the Montie Gear Garbage Bag Holder, turn any tree into a hanging place for your garbage bag!

    Strap it to the tree, roll a corner of your garage bag around the lightweight aluminum support and pull the shock cords over and snap them in. Just that simple.

    For more detailed information about the Montie Gear Gargabe Bag Holder, check out the Description tab below!

    Made in USA

    Not rated yet
    • $29.95
  • Conference Table

    Conference Table

    Show off your distinctiveness with this well-designed, well-built and just plain awesome (in our opinion) table. The structure is water jet cut aluminum with stainless steel hardware. The table has a powder coat finish for durability. The vanity shield is a high strength, low weight cast concrete. This table can be used indoors or out. Custom frame and concrete colors available. Many colors available at no extra charge. We can also include your logo as a sand blasted image on the glass.

    For more detailed information about the Montie Gear Conference Table, check out the Description tab below!

    Made in USA

    Not rated yet
    • $8995.00
  • Breakdown Arrow Set for Y-Shot

    Breakdown Arrow Set for Y-Shot

    Small game beware! The Y-Shot plus the Breakdown Arrow Set is a potent combination. Three aluminum shaft arrows with Talon 125 grain broad-heads made specifically for small game plus an arrow rest, field points, and a double band are included in this set, giving you a silent way to kill small game without the report of rifle or shotgun fire.

    The included Talon 125 grain broad-heads are designed specifically for use with small game and pack a devastating punch! Field points are included as well for when you are just wanting to shoot around for target practice.

    For more detailed information about the Breakdown Arrow Set, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 1)
    Reviews: 1
    1
    • $159.95
  • 13.56MHz RFID Troubleshooting Tool - ISO 14443

    13.56MHz RFID Troubleshooting Tool - ISO 14443

    Never again wonder whether your HF / contactless reader (13.56MHz) is radiating a signal!  If your reader isn't properly reading cards, then use this tool to determine if the reader's radio is actually working.  Important tool for testing your EMV credit card payment system or entry system.  Great for checking 13.56MHz hotel / hospitality door locks.

    Montie Gear RFID Troubleshooting Tools are used worldwide as simple tools to test whether RFID portals are emitting a signal. These inexpensive tools have helped technicians troubleshoot RFID systems since 2009.

    This inexpensive card allows you to quickly troubleshoot your contact-less reader without have to send the reader back to the manufacturer. We keep these cards in stock so they ship quickly.

    Branding: These cards can even be branded with your logo! Integrate these cards into every 13.56 MHz system you sell as a great way to provide an added value to your customers, or an added revenue stream for you!

    For more detailed information about the Montie Gear 13.56MHz RFID Field Detector, check out the Description tab below!

    NOTE: This card does not detect RFID / Contact-less tags. 

    Made in USA

    Not rated yet
    • $24.95
  • 13.56MHz RFID Troubleshooting Tool - ISO 14443 - 3 Pack
    • 10% off

    13.56MHz RFID Troubleshooting Tool - ISO 14443 - 3 Pack

    This is a handy 3 pack of our 13.56MHz Troubleshooting Tool.

    Never again wonder whether your HF / contactless reader (13.56MHz) is radiating a signal!  If your reader isn't properly reading cards, then use this tool to determine if the reader's radio is actually working.  Important tool for testing your EMV credit card payment system or entry system.  Great for checking 13.56MHz hotel / hospitality door locks.

    Montie Gear RFID Troubleshooting Tools are used worldwide as simple tools to test whether RFID portals are emitting a signal. These inexpensive tools have helped technicians troubleshoot RFID systems since 2009.

    This inexpensive card allows you to quickly troubleshoot your contact-less reader without have to send the reader back to the manufacturer. We keep these cards in stock so they ship quickly.

    Branding: These cards can even be branded with your logo! Integrate these cards into every 13.56 MHz system you sell as a great way to provide an added value to your customers, or an added revenue stream for you!

    For more detailed information about the Montie Gear 13.56MHz RFID Field Detector, check out the Description tab below!

    NOTE: This card does not detect RFID / Contact-less tags.

    Made in USA

    Not rated yet
    • $67.37
  • EMP Resistant Box / Faraday Cage

    EMP Resistant Box / Faraday Cage

    Be prepared in the event of an EMP (Electromagnetic Pulse) or CME (Coronal Mass Ejection) by storing your most valuable belongings in an EMP resistant box.

    This box is made from 3/16" aluminum plate welded together. The connection between the lid and the box uses three types of industry standard gaskets to form a robust Faraday cage. You can quickly enter and then reseal the box with six stainless steel clamps.

    Initial testing on 13 Jun 14, indicates that you can expect a minimum of 50 dBm of shielding effectiveness from 100 kHz to 1 gHz, with a shielding effectiveness greater than 76 dB at 300 mHz and 66 dBm at 1 gHz.

    For more detailed information about the Montie Gear Y-Shot slingshot, check out the Description tab below!

    Options:

    • Custom sizes available upon request (contact montie@montie.com)
    • MuMetal iron lining for protection from the magnetic effects of the EMP.

    Download brochure

    Expect 8 weeks for delivery.

    Made in USA

    Not rated yet
    • $4495.00
  • Breakdown Arrow for Y-Shot

    Breakdown Arrow for Y-Shot

    Small game beware! The Y-Shot plus the Breakdown Arrow is a potent force to be reckoned with. An aluminum shaft arrow with Talon 125 grain broad-head made specifically for small game gives you a silent way to kill small game without the report of a rifle or shotgun fire.

    The included Talon 125 grain broad-head is designed specifically for use with small game and packs a devastating punch! A field point is included as well when you are just wanting to shoot around for target practice.

    For more detailed information about the Breakdown Arrow, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 1)
    Reviews: 1
    1
    • $39.95
  • Iron Sights for Y-Shot

    Iron Sights for Y-Shot

    Shoot more accurately with an Iron Sight for your Y-Shot Slingshot! Take most of the guess work out of shooting by using the three posts to line up your target for a more precise shot.

    This is a bolt on attachment to your Y-shot slingshot (no modifications necessary)  that gives you iron sights for more accurate shooting. The sights are compatible with the wrist brace and the arrow rests.

    Works for right or left handed shooters!

    For more detailed information about the Montie Gear Iron Sights, check out the Description tab below!

    Note: Slingshot not included.

    Made in USA

    Not rated yet
    • $34.95
  • Fiber Optic Sights for Y-Shot

    Fiber Optic Sights for Y-Shot

    Obtain more accurate shooting with your slingshot by attaching a Fiber Optic Sight! This sight has fiber optic iron sights and an option for a picatinny rail mount for mounting your favorite optic (such as a red dot, scope, or other parallax free sight) to your slingshot.

    Easily adjust for windage and elevation with the fully adjustable fiber optics.

    The sights are compatible with the wrist brace and the arrow rest.

    Note: Optical sight / scope shown and slingshot for example only. Optical sight and slingshot not included.

    For more detailed information about the Montie Gear Fiber Optic Sights, check out the Description tab below!


    Note for Potential Purchasers of Picatinny Rail Option

    ITAR Product - If you select the version with the picatinny rail (does not apply to the fiber optic sights only version), you confirm that you understand, acknowledge, and agree to the Export Policy. I am a U.S. Person, and I do not intend to export this product.

    This product is also available without the Picatinny rail, which we CAN sell outside of the US. To purchase the sights without the Picatinny rail, please select that configuration below.

    Made in USA

    Not rated yet
    • $79.95
  • Adapter Plate for the Y-Shot Slingshot
    • 60% off

    Adapter Plate for the Y-Shot Slingshot

    Want to modify your Y-Shot or Gloveshot slingshot? Need to add an optic, sights, or a flashlight? Use this plate as your starting point and mod away!

    The open design of this Adapter Plate allows for you to attach any number of items to your Y-Shot with no predetermined locations. Customize how you please, making your Y-Shot your own!

    This item does not include the slingshot, it is for the adapter plate only.

    For more detailed information about the Montie Gear Adapter Plate, check out the Description tab below!

    Made in USA

    Not rated yet
    • $9.95
  • D.I.Y. Y-Shot Slingshot Kit

    D.I.Y. Y-Shot Slingshot Kit

    Have a unique paint design or paracord design in mind, but don't see it stocked in our store? This kit will allow your design to become a reality!

    For those of you looking for something a little different in your slingshot we offer you the D.I.Y. Y-Shot Kit. This kit contains everything you need to make your Montie Gear Y-Shot exactly how you want it. Get creative!

    We give you a blank, uncoated Aluminum frame and side plates so you can paint them in any color you want, any way you like. We also include instructions on how to wrap the handle and assemble the slingshot.

    Once you finish making the Y-Shot your own, there's nothing wrong with a little gloating to your friends!

    For more detailed information about the Montie Gear D.I.Y. Y-Shot Slingshot Kit, check out the Description tab below!

    Made in USA

    Score: 5.00 (votes: 8)
    Reviews: 8
    8
    • $89.95
Products: 127 of 45
Show: 27